Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Bronx
A properly fitted chimney cap and sound crown in Bronx typically runs $340-$890 for most multi-flue masonry stacks, with same-week scheduling available once we complete your Level-2 camera inspection. We’re Hearthstone Chimney Co., and we’ve been answering calls with a live person, 24 hours a day, for over 42 years. We offer Bronx Chimney Cleaning & Sweep as part of our full range of services. Our crews serve Bronx from our New York City office, and we know the borough’s chimneys the way a local knows the D train - mostly pre-war masonry stacks with multiple flues serving gas-converted boilers, not the single decorative fireplaces suburban pages talk about. If you’re seeing water stains on top-floor ceilings, hearing debris rattle down the flue, or your super found cracked mortar on the roof, call us at (914) 246-5794. We’ll send photos you can see and a plain-English verdict.
Why Hearthstone Chimney Co. Is Bronx’s Preferred Chimney Cap & Crown Company
Bronx landlords and building managers call us because we document what we find. Every Chimney Cap & Crown inspection ends with camera footage and a written report - no guesswork, no pressure.
We’ve worked on chimney stacks from Fordham to Throggs Neck, and we understand what the borough’s housing stock actually demands. Pre-war walkups with six, eight, or twelve flue tiles under one crown need a different approach than a single-flue ranch in Westchester.
Our technicians are background-checked, uniformed, and complete most jobs in a single visit. No-hassle upfront pricing means the number on your estimate is the number on your invoice.
Every job carries our 90-Day Done Right Promise in writing - Krafted right, Every time, Your home first, Standing behind it. If it’s not right, we make it right. No arguing, no paperwork chase.
And when you call (914) 246-5794, a live person answers. Not a callback queue. Not an app.
Our Chimney Cap & Crown Services in Bronx
Multi-Flue Cap Installation
Bronx chimney caps are overwhelmingly specified for multi-flue masonry stacks - one cap sheltering six to twelve clay tile flues on a single pre-war stack. That’s a totally different spec than the single-flue caps common in Mount Vernon or Pelham. We measure every flue tile’s diameter and spacing, then source a cap with proper mesh screening and minimum 5-inch side clearance to meet NFPA 211 draft requirements. In the Bronx, where Local Law 97 conversions have shifted boilers from #4 oil to natural gas, those flues run cooler and wetter than their original design intended. A cap that fits wrong, or leaves flues exposed, lets rain accelerate the mortar deterioration those gas conversions already started. We install Gelco and Olympia Chimney multi-flue caps in stainless or copper, sized to your stack’s exact flue count.
Custom Cap Fabrication
Some Bronx stacks defy standard sizing. Oversized crowns on 1920s apartment buildings, irregular flue spacing, or decorative masonry corbelling can make off-the-shelf caps impossible. We fabricate custom caps measured to your stack’s exact dimensions, with welded seams and proper counter-flashing integration into the existing masonry. Riverdale co-ops with uncapped 1970s-bricked fireplaces, City Island homes with salt-air corrosion - we’ve fitted caps to both. If you need Chimney Repair in Bronx, we handle that too. Custom work in Bronx typically runs $680-$1,400 depending on metal gauge and stack complexity.
Crown Repair
The crown is the concrete or mortar wash that seals the top of your chimney stack, sloped to shed water. On Bronx pre-war buildings, crowns were often troweled on as a thin mortar skim with no overhang and no drip edge. They crack within two or three freeze-thaw cycles. Our crew rebuilds crowns with proper Portland-cement-based mix, reinforced where the span exceeds 30 inches, and always forms a drip edge so water sheds clear of the brick face below. Crown repair in Bronx runs $450-$780 for most multi-flue stacks. We also offer HeatShield crown coating for sound structural bases with surface cracking - a bonded ceramic resurfacing that carries its own warranty.
Crown Coating with HeatShield
Not every cracked crown needs tear-out. If the structural base is solid but the surface is spalled or crazed, we clean and prime the existing crown, then apply HeatShield’s bonded ceramic coating in two passes. It forms a monolithic, waterproof membrane rated to 3,000°F, with proper slope and drip edge built in. For Bronx landlords facing DOB boiler inspection deadlines, this can be a faster, less disruptive path to compliance than full crown rebuild. Crown coating typically runs $340-$560.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bronx
We work exclusively with professional-grade materials - no builder-grade substitutes that fail in three seasons. For Chimney Cap & Crown in Bronx, we stock and install HeatShield for crown resurfacing, Gelco for standard multi-flue caps, and Olympia Chimney for custom and heavy-gauge applications. These are the brands specified by building engineers and insurance underwriters, not the thin-galvanized box-store units that rust through in two Bronx winters. We keep common cap sizes and crown repair materials on our trucks, so most Bronx jobs don’t wait on parts.
Common Chimney Cap & Crown Problems We See in Bronx Homes
- Mortar-wash crowns with zero overhang. Pre-war Bronx stacks were often topped with a thin troweled mortar layer that cracks and falls apart within a few freeze-thaw cycles. The fix is a cast crown with proper slope and drip edge, not another skim coat that’ll fail next winter.
- Missing or undersized caps on multi-flue stacks. A single generic cap on a twelve-flue stack leaves most flues open to rain, squirrels, and nesting birds. We measure every flue and fit a cap that shelters all of them with proper clearance.
- Salt-air corrosion in shoreline neighborhoods. City Island and Throggs Neck face additional salt exposure off Long Island Sound. Cheap galvanized caps rust through fast there. Stainless or copper is the only sensible spec.
- Interior flue deterioration from gas-conversion moisture. Since Local Law 97 pushed oil-to-gas conversions, cooler exhaust condenses inside oversized clay liners. Cracked tile and open mortar joints let that moisture reach the chimney walls. A proper cap reduces rain intrusion, but the flue itself may need relining - and we’ll show you camera evidence before recommending anything.
Pricing for Chimney Cap & Crown in Bronx, NY
| Service | Typical Range in Bronx |
|---|---|
| Single-flue cap installation | $180-$340 |
| Multi-flue cap (standard sizes) | $340-$620 |
| Custom cap fabrication | $680-$1,400 |
| Crown repair (rebuild) | $450-$780 |
| Crown coating (HeatShield) | $340-$560 |
| Level-2 camera inspection with photo report | $89 (Seasonal Tune-Up special) |
What moves the number? Stack height and access (roof pitch, parapet walls, need for scaffolding), flue count and spacing, crown condition (full rebuild vs. coating), and metal choice (galvanized, stainless, or copper). We give you the full price before we start. No surprises on the bill. Call (914) 246-5794 for a free estimate - we’ll inspect, photograph, and quote.
Standing offers: $50 off any repair over $250, free second opinion on any written estimate, $89 Seasonal Tune-Up, and a permanent 5% Senior and Veteran discount.
We Also Serve Cities Near Bronx
Our crews work throughout the metro area, including Bronx, Mount Vernon, Pelham, Yonkers, and Bronxville. Same standards, same documented inspection process, same 90-Day Done Right Promise. If you’re in Westchester County or southern Bronx and need chimney cap or crown work, we’re nearby.
Serving Bronx, NY - Our Local Coverage Area
We’re based in the Bronx area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Bronx
One properly sized multi-flue cap is almost always the right choice for Bronx pre-war stacks. Individual caps on each flue tile leave gaps where rain and animals enter, and they often conflict with each other on spacing. We measure every flue’s diameter and the stack’s overall dimensions, then specify a single cap with adequate mesh height and side clearance for all flues. Call (914) 246-5794 and we’ll survey your stack.
Thin mortar-wash crowns without proper overhang or drip edge absorb water, freeze, and spall. Bronx’s cold, wet winters accelerate this. The fix is a cast crown with Portland-cement-based mix, proper slope, and a formed drip edge - not another troweled skim. Our crown rebuilds include these elements as standard.
Natural gas exhaust is cooler and wetter than #4 or #6 oil exhaust. In Bronx’s oversized clay tile flues, that moisture condenses on the walls, dissolving mortar and accelerating tile cracking. A proper cap keeps rain out, but the flue liner itself may need attention. Our camera inspection shows you exactly what’s happening inside.
Yes - always inspect before uncapping. Our technicians working Riverdale regularly find collapsed dampers, failed smoke chambers, and decades of debris or animal nesting in systems sealed since the 1970s oil crisis. We camera-inspect the flue, check the smoke chamber and damper, and give you a plain-English verdict on what needs addressing before the first fire.
It can, if rain is entering through an open or improperly capped flue. On a 1928 walkup off the Grand Concourse in Fordham, our crew found three boiler flues under one failing crown with no cap at all - rain had been washing down two flues for years. We installed an Olympia Chimney custom multi-flue stainless cap, rebuilt the crown with proper overhang and drip edge, and flashed it so water shed clear of the stack. The water stains stopped. But caps won’t fix roof leaks, parapet wall failures, or internal flue condensation from gas conversions. We diagnose the actual source before recommending anything. Call (914) 246-5794 for a free estimate.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Bronx and surrounding communities since 1984.