A Hearthstone company - serving Mount Vernon, NY

DuraFlex Flue Liner Replacement Nationwide

Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Styles & brands we work with

Sweep & inspection
Sweep & inspection
Caps & crowns
Caps & crowns
Flue relining
Flue relining
Masonry repair
Masonry repair
Gas fireplace service
Gas fireplace service

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DuraFlex Flue Liner Replacement: The Mount Vernon Owner’s Guide

A DuraFlex flue liner replacement in Mount Vernon typically runs $2,800-$4,500 installed, depending on chimney height, diameter, and whether the chase needs repair. We stock DuraFlex-compatible liner in 6″, 7″, and 8″ diameters and can usually schedule within 48 hours during sweeping season. Most Mount Vernon homeowners discover the problem mid-winter: a smoky fireplace, a tar-like smell, or a sweep’s camera showing cracked or separated liner sections that no longer protect the masonry.

Call (914) 246-5794

Which DuraFlex Models This Applies To

DuraFlex produces several liner families, and matching the right one matters. The DuraFlex SW (stainless wrap) and DuraFlex HT (high-temperature) series are the two we see most in Mount Vernon homes built between 1950 and 1980, especially the two-family colonials near Fleetwood and the brick ranches off Sandford Boulevard. Check the metal tag at the top of your chimney chase; DuraFlex stamps the series, diameter, and UL listing date there. If the tag is missing, we measure the flue opening and the chimney height to spec the replacement.

We install OEM DuraFlex liner and also carry quality aftermarket equivalents from Olympia Chimney and Copperfield that meet the same UL 1777 standard. For most Mount Vernon chimneys, the aftermarket option saves 15-20% without sacrificing longevity. The exception is the DuraFlex HT series, which uses a proprietary seam weld; mixing that with generic liner can void component warranties. We’ll check your existing tag and tell you exactly what you’re getting before we order.

Signs Your DuraFlex Flue Liner Replacement Is Failing

  • Smoke backing up into the room. This usually means a liner breach or collapse has opened a gap between the flue gases and the living space. In Mount Vernon’s older masonry, we’ve seen liner sections slip at the joints after decades of freeze-thaw cycling.
  • Strong, acrid odor even when the fireplace is cold. Creosote is seeping through cracks in the liner and soaking into the surrounding brick. Once that happens, the smell persists until the liner is replaced and the masonry is sealed.
  • Visible cracks or gaps in the liner during inspection. Our camera catches these before they’re visible from below. DuraFlex liner can develop longitudinal splits where the flex sections were over-bent during original installation.
  • White or orange staining on exterior chimney brick. This is acid condensation eating through a compromised liner and leaching salts from the mortar. In Mount Vernon’s climate, this accelerates once the liner fails; we’ve replaced liners where the adjacent brick was crumbling after just two winters of exposure.
  • Difficulty starting or maintaining a draft. A liner that has partially collapsed or shifted creates turbulence instead of smooth upward flow. This is especially common in taller Mount Vernon chimneys on three-story homes near the Hutchinson River Parkway corridor.

Replacement Cost & What’s Included

Here’s how pricing breaks down for a typical Mount Vernon installation:

Component Price Range
DuraFlex-compatible liner (materials only) $1,200 - $2,200
Labor: removal, installation, top plate, bottom connector $1,200 - $1,800
Chase repair or refractory panel replacement (if needed) $400 - $800
Typical total installed $2,800 - $4,500

The spread depends on chimney height (a three-story Fleetwood two-family runs higher than a single-story ranch), access difficulty, and whether we find damaged masonry once the old liner is out. We quote the full number before we start. No surprises on the bill. Every DuraFlex flue liner replacement carries our 90-Day Done Right Promise in writing - if it’s not right, we come back, no arguing.

DIY or Call Us?

There’s no safe DIY path for flue liner replacement. The work involves working at height on a steep or flat roof, handling sharp stainless sections in tight chases, and properly sealing the top plate to prevent water intrusion and carbon monoxide leakage. A misaligned joint or an unsealed gap can channel deadly gases into wall cavities. We’ve been called to Mount Vernon homes where a homeowner’s self-installed liner had a three-inch gap at the collar - undetectable from below, dangerous in operation.

What you can do: check your fireplace and chimney exterior for the symptoms above, and call us at (914) 246-5794. We’ll run a Level-2 camera inspection, show you the photos, and give you a plain-English verdict. If it needs doing, we’ll tell you. If it doesn’t, we’ll tell you that too.

FAQs

Need Chimney Cleaning help in Mount Vernon? Licensed & insured · Photo-documented response · free estimates
Call (914) 246-5794
Local Service Coverage

Request a Free Estimate in Mount Vernon

Tell us what you need - Hearthstone Chimney Co. responds fast. No obligation.

When you send us your details, you acknowledge our Privacy Policy and consent to receive communications by phone, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Call Now - 24/7 Dispatch